Please reach us at drnanoinc@yahoo.com if you cannot find an answer to your question.
DR. NANO is an Indian company that has built its reputation on exceptional quality and service. With the experience of over a decade of suspension design, manufacturing expertise and experience in the suspension industries ensures that you’re in safe hands when dealing with DR. NANO
DR. NANO have the ability to offer multiple options for most vehicles (avoiding the ‘one size fits all’ approach) to provide high quality suspension kits designed to provide the best possible;
Handling, Safety, Ride Quality, Load Carrying Capacity and Vehicle Control
whether you are driving on road or off the beaten track.
Choose DR. NANO’s for their reliable service, products designed to perform in any condition, as well as their knowledge and expertise to ensure the best experience for you and your vehicle.
Please see our Condition's of Sale page for all information regarding sales and warranty.
Warranty inquiries must be made at the place of purchase.
If you encounter a problem with your DR. NANO products, please contact the original place where these goods/parts were purchased first.
If this is unsuccessful please contact our head office through drnanoinc@yahoo.com, providing as much information as possible. This may include;
The DR. NANO lifting and lowering heights are measured based on brand new vehicles and provide only an approximate guide on how much the vehicle will be be raised or lowered. In most cases the original springs on older, second hand vehicles may have sagged significantly compared to the original factory ride height. This may mean that the vehicle is required to be lifted higher or lowered slightly less than the amount stated in our corresponding catalogue.
Raised 4WD Springs
Raised 4WD Springs listed in the DR. NANO Catalogue (for any vehicle other than 4×4’s) will raise the vehicle approximately 30-50mm, in most cases, due to the vehicles suspension and steering geometry restraints. The DR. NANO 4×4 Suspension Catalogue lists the raised heights beside each part number for any particular vehicle.
Reinforced Main Coil Springs
Reinforced Main Coil Springs will generally raise the vehicle by approximately 10mm.
Lowered Springs
Lowered Springs will generally lower a vehicle approximately 30mm unless noted otherwise.
Shock Absorbers
DR. NANO Nitro Gas Shock Absorbers are designed and suited to lift kits up to 50mm/2″.
They are able to be used with original springs, but must be fitted in pairs.
4WD Coil Springs
DR. NANO 4WD Springs that provide a lift of up to 50mm/2″ are able to be used with the original suspension on a vehicle unless noted otherwise. However it is highly recommended that DR. NANO Nitro Gas Shock Absorbers are also fitted at the same time to ensure sufficient wheel down-travel and to maintain optimum vehicle handling and safety characteristics.
When fitting DR. NANO 4WD Coil Springs, especially on Mitsubishi's, always check the small identification labels attached to the springs for the words ‘Left Side/LHS’ or ‘Right Side/RHS’.
The most common problem with vehicles lifting more or less than expected is due to incorrect part selection. In most cases, the incorrect spring has been chosen to suit the required application. It is also common in a lot of cases that springs are chosen originally for a vehicle with little to no constant additional load, then as more accessories are added to the vehicle the spring is no longer suitable for the application and different springs are now required.
This causes the vehicle owner to believe the springs have sagged, however it is the case that the springs are not designed for the additional load added, and if the additional load is removed the springs will return to the original height.
DR. NANO 4WD Coil Springs once fitted may settle approximately 5mm in the first few weeks after being fitted but will not settle any further afterwards.